914 PC Bots Forum  


Ronau
User

Expert Boarder
Posts: 21
graphgraph
Karma: 0  
HELP! Need M3 drivers - 2010/01/08 21:19 I had to reformat my Hard drive and I need the drivers to support the M3 controller. I thought it was in the Phibget folder, but that doesn't seem to be it. There was a 914 resource tab on the left menu of the web site, but it isn't there now. I left a message with whitebox robotics, but no answer. Poor EMC is sitting in the corner of my office and can't move! Please, any help?

Ted
  | | The administrator has disabled public write access.
c6jones720
User

Platinum Boarder
Posts: 349
graphgraph
Karma: 2  
Re:HELP! Need M3 drivers - 2010/01/09 06:08 A zipped archive of the drivers is 151KB. The maximum file size that can be posted here is 64KB. Im sure lots of us have the files you need.
  | | The administrator has disabled public write access.
aibo_rescue
User

Platinum Boarder
Posts: 153
graphgraph
Karma: 2  
Re:HELP! Need M3 drivers - 2010/01/10 12:58 Check the WBR support page ... under .NET there is a zip file with M3 drivers:
http://www.whiteboxrobotics.com/Support/support_dotnet.html

Is that what you are looking for?

BTW, "Generic FTDI drivers are provided that can then be installed in Windows that will allow the Windows OS to detect the M3 device after the EEPROM is erased so that both Windows and Linux can be used." ... under Linux in WBR support section.

Post edited by: aibo_rescue, at: 2010/01/11 05:43
Best ... Richard
  | | The administrator has disabled public write access.
Ronau
User

Expert Boarder
Posts: 21
graphgraph
Karma: 0  
Re:HELP! Need M3 drivers - 2010/01/12 21:54 Yes, that page is specifically what I was looking for!!!

Thanks you.

Ted
  | | The administrator has disabled public write access.