Home arrow Enthusiast Projects arrow Motherboard enclosure mod
Motherboard enclosure mod
Tuesday, 27 February 2007
ImageDave Evans sent in this modification that he made to the system board enclosure in his 914. Dave has altered the mini-itx motherboard mounting points so that there is more clearance for the external cables once the plastics are fitted.

There is quite a bit of space around the mini-itx board by default in the 9 Series PC Bot chassis, so you could probably move it around in several directions depending on what else you wanted to plug into it or fit in the motherboard enclosure. Perhaps you could fit your own custom electronics under the mini-itx board...?

This article will remain in the Enthusiast Projects section for future reference.


Discuss this article on the forums. (0 posts)
 
< Prev   Next >